Yanmar SV100
Couldn't load pickup availability
Ask an expert
Yanmar SV100-2 Compatible Attachments
The Yanmar SV100-2 is a 10-ton class midi-excavator that combines compact dimensions with class-leading performance. Powered by the Yanmar 4TNV98CT four-cylinder turbocharged diesel engine delivering 51.7 kW (70.3 HP), this machine excels at urban renewal, grading, demolition, and heavy excavation where stability, power, and a spacious cabin are essential.
Attachment fitment for the Yanmar SV100-2 should be checked against the machine's carrier weight, hydraulic flow and pressure, pin dimensions, arm configuration, and the material being handled. BHE Attachments can help review these details before quoting or installing an attachment.
Yanmar SV100-2 Attachment Matches
The attachment categories below are organized for the Yanmar SV100-2 carrier class. Final compatibility should be confirmed using the exact machine configuration, hydraulic setup, mounting dimensions, coupler style, and job application.
Hydraulic Breakers for Concrete, Rock & Asphalt
Hydraulic breakers and hammers are a key attachment match for the Yanmar SV100-2 when the job requires concrete breaking, rock breaking, asphalt removal, trenching through hard material, or demolition support on demanding job sites.
Montabert breaker models previously identified for review with this carrier class include the SC42, SC50, and 501NG. Final selection should be based on the carrier's hydraulic flow, operating pressure, breaker weight, bracket setup, and duty cycle.
Digging, Trenching, Grading & Cleanup Buckets
Bucket selection for the Yanmar SV100-2 should match the work being performed. Digging buckets are commonly used for heavy excavation and trenching, while grading or cleanup buckets are better suited for ditching, slope work, backfill shaping, and finish grading.
Bucket fitment should be checked by pin diameter, pin spread, arm width, coupler configuration, width, capacity, tooth style, edge type, and material conditions. The SV100-2 offers short and long arm options with maximum dig depths of 4,570 mm and 4,910 mm respectively, and a maximum digging reach of 7,570 mm with the long arm.
Couplers, Thumbs & Grapples
Couplers, thumbs, and grapples can improve the Yanmar SV100-2's usefulness for attachment changes, debris handling, brush handling, demolition cleanup, pipe handling, and sorting material on busy job sites.
These tools should be reviewed for arm geometry, thumb length, coupler type, hydraulic plumbing, bracket style, and the machine's lifting and stability limits. The SV100-2 features Yanmar's patented VICTAS system with asymmetric crawlers for class-leading stability when handling heavy or irregular loads.
Plate Compactors for Trench & Backfill Work
Plate compactors can be reviewed for the Yanmar SV100-2 when the work involves trench compaction, utility installation, backfill compaction, road repair, or site preparation on medium-to-large projects.
Compactor compatibility should be confirmed by attachment weight, hydraulic flow, pressure range, mounting bracket, hose routing, and the compaction area required for the job. The SV100-2 delivers a maximum hydraulic pressure of 275 bar with a progressive three-pump ViPPS hydraulic system for powerful and smooth attachment operation.
Rippers & Specialty Excavator Tools
Rippers and specialty tools may be considered for the Yanmar SV100-2 when the machine is working in compacted soil, frost, hardpan, rocky material, or site preparation conditions where a standard bucket is not the most efficient first tool.
Tool selection should be based on material type, breakout needs, carrier size, mounting setup, and whether the tool will be used before bucket excavation or as part of demolition cleanup. The SV100-2 delivers 68.5 kN bucket digging force and 45.8 kN short arm digging force for tough ground conditions.
Yanmar SV100-2 Jobsite Applications
These application notes help connect the Yanmar SV100-2 to the attachment type most often used for each kind of work.
Concrete & Rock Breaking
Use a properly sized hydraulic breaker or hammer when the Yanmar SV100-2 is assigned to concrete removal, rock breaking, asphalt removal, trench obstruction removal, or demolition prep on demanding sites.
Excavation & Trenching
Use digging, trenching, or rock buckets when the machine is being used for utility installation, drainage work, foundations, roadwork, and general heavy excavation.
Grading & Cleanup
Use grading, cleanup, or ditching buckets when the job requires finish shaping, slope work, ditch cleaning, loose material handling, or surface cleanup on larger job sites.
Material Handling
Use thumbs, grapples, or coupler-supported tools when the Yanmar SV100-2 needs to handle debris, brush, pipe, demolition material, or irregular objects on busy construction sites.
Compaction
Use a plate compactor when the machine is supporting trench backfill, utility repair, road repair, or site preparation where controlled compaction is needed on medium-to-large projects.
Hard Ground Preparation
Use a ripper or specialty ground-engagement tool when compacted soil, frost, hardpan, or rocky material needs to be loosened before excavation on challenging terrain.
Attachment Fitment Factors
The Yanmar SV100-2 should be matched with attachments using both machine specifications and jobsite requirements. These checks help reduce incorrect fitment, poor performance, and unnecessary attachment wear.
Machine & Mounting Requirements
- Confirm carrier operating weight (9,625 kg standard / 10,025 kg with additional counterweight) and excavator size class.
- Check pin diameter, pin spread, arm width, and coupler configuration.
- Match the attachment bracket to the Yanmar SV100-2 mounting setup.
- Review attachment weight against machine lifting capacity and stability limits.
- For buckets, confirm width, capacity, tooth style, edge type, and application rating.
- Verify arm length (short 1,950 mm or long 2,300 mm) and VICTAS undercarriage configuration for optimal stability.
Hydraulic & Application Requirements
- Confirm hydraulic pressure (275 bar maximum) and flow (dual variable piston pumps 2 x 77.7 L/min) for powered attachments.
- Verify auxiliary hydraulic circuit setup, controls, and hose routing (two auxiliary circuits with adjustable proportional control available).
- Select breaker tools based on material, including moil point, chisel, blunt, or specialty tools.
- Match the attachment to the material being worked: concrete, rock, asphalt, soil, brush, or debris.
- Review duty cycle, production needs, operator use, and jobsite conditions before final selection.
Yanmar SV100-2 Attachment Overview
Use this table as a quick reference for matching common Yanmar SV100-2 attachment categories to their main purpose.
| Carrier Model | Attachment Type | Best Use | Fitment Checks | Typical Applications |
|---|---|---|---|---|
| Yanmar SV100-2 | Hydraulic Breakers & Hammers | Breaking concrete, rock, asphalt, and hard material on demanding sites. | Hydraulic flow, pressure, breaker weight, bracket, tool type, and duty cycle. | Demolition, road repair, trenching, concrete removal, rock breaking. |
| Yanmar SV100-2 | Excavator Buckets | Digging, trenching, grading, ditching, cleanup, and material loading. | Pin dimensions, coupler setup, bucket width, capacity, tooth style, and edge type. | Excavation, utility work, grading, drainage, site development. |
| Yanmar SV100-2 | Couplers, Thumbs & Grapples | Changing attachments and handling loose, bulky, or irregular material. | Arm geometry, coupler type, thumb length, hydraulic plumbing, and lift limits. | Debris handling, brush handling, pipe handling, demolition cleanup. |
| Yanmar SV100-2 | Plate Compactors | Compacting trench backfill, soil, and utility repair areas. | Hydraulic flow, pressure range, compactor weight, bracket, and hose routing. | Trench compaction, road repair, backfill, utility installation, site prep. |
| Yanmar SV100-2 | Rippers & Specialty Tools | Loosening compacted or hard material before excavation. | Carrier size, mounting setup, tooth design, material conditions, and breakout needs. | Hardpan, frost, rocky soil, site prep, pre-excavation ripping. |
Final compatibility can vary by Yanmar SV100-2 configuration, coupler, pin dimensions, hydraulic setup, and job application. Always verify fitment before purchasing or installing an attachment.
Find the Right Attachment for Your Yanmar SV100-2
BHE Attachments can help compare hydraulic breakers, buckets, couplers, thumbs, compactors, grapples, rippers, and specialty tools for the Yanmar SV100-2. The best attachment depends on whether the machine will be breaking, digging, grading, compacting, handling material, or preparing hard ground on demanding job sites.
To narrow the right option, provide the machine serial number if available, current coupler setup, hydraulic flow and pressure information, pin dimensions, arm length, and a short description of the work being performed.
Need Help Confirming Compatibility?
BHE Attachments can review your Yanmar SV100-2 specifications, hydraulic requirements, mounting setup, pin dimensions, coupler configuration, and application needs to help identify the right attachment category and product fit.
Ready to quote attachments for your Yanmar SV100-2?
Send the machine setup and job application to BHE Attachments so the attachment recommendation can be matched to the Yanmar SV100-2 carrier class, hydraulic setup, mounting requirements, and work conditions.