John Deere 350D LC
Couldn't load pickup availability
Ask an expert
John Deere 350D LC Compatible Attachments
The John Deere 350D LC is a 35.4-ton excavator built for demanding excavation, loading, trenching, and site-development work. Its Powerwise III engine/hydraulic management system provides smooth control, while the machine's hydraulic system and auxiliary circuits support a wide range of attachment applications. This guide covers attachment compatibility for the 350D LC, with emphasis on breakers, hammers, buckets, couplers, thumbs, compactors, grapples, rippers, and other job-matched tools.
Before selecting an attachment for the 350D LC, verify carrier weight, hydraulic flow and pressure, auxiliary circuit layout, pin geometry, coupler or quick-hitch style, bracket fit, and the material you intend to break, dig, compact, or move. BHE Attachments can help review these requirements before you request a quote or install an attachment.
John Deere 350D LC Attachment Matches
Browse the attachment categories below for the 350D LC. Final fit must be confirmed against your machine's exact hydraulic configuration, mounting dimensions, coupler style, and jobsite demands.
Hydraulic Breakers for Concrete, Rock & Asphalt
Breakers and hammers are a natural fit for the 350D LC when you need to fracture concrete, break rock, remove asphalt, or clear obstructions in demanding demolition and construction environments.
The Montabert V1800, V45, V2500, V3500, V55, and XL2600 are recommended for fitment review with the 350D LC. Final breaker compatibility can depend on the 350D LC's machine weight, hydraulic flow, pressure, mounting configuration, and application.
Digging, Trenching, Grading & Cleanup Buckets
Match the bucket to the task. General-purpose digging buckets handle bulk excavation and trenching, while grading and cleanup buckets are ideal for ditching, slope shaping, backfill finishing, and surface cleanup.
The 350D LC is available with general-purpose, general-purpose high-capacity, heavy-duty, and heavy-duty high-capacity bucket configurations. Fitment should account for arm length, bucket width and capacity, pin dimensions, tooth style, and ground conditions.
Couplers, Thumbs & Grapples
Couplers, thumbs, and grapples extend what the 350D LC can handle on site-rapid attachment swaps, debris and brush cleanup, pipe placement, demolition sorting, and irregular load handling.
Review arm geometry, thumb reach, coupler type, hydraulic line routing, bracket design, and the machine's lift and stability ratings before selecting these tools.
Plate Compactors for Trench & Backfill Work
Plate compactors are worth reviewing for the 350D LC when the job calls for compacting trench backfill, utility bedding, road repair bases, or general site-prep surfaces.
Key fitment items include attachment weight, hydraulic flow and pressure range, mounting bracket, hose routing, and the compaction footprint needed for the work area.
Rippers & Specialty Excavator Tools
When the 350D LC faces compacted soil, frost, hardpan, or rocky subgrade, a ripper or specialty ground-engagement tool can loosen material before the bucket takes over.
Selection depends on material hardness, required breakout force, carrier class, mounting interface, and whether the tool is used for pre-excavation ripping or specialty site work.
John Deere 350D LC Jobsite Applications
Match the attachment to the task. The notes below link common 350D LC work scenarios to the tools best suited for each.
Concrete & Rock Breaking
Deploy a correctly sized hydraulic breaker or hammer when the 350D LC is tasked with concrete demolition, rock fracturing, asphalt removal, trench obstruction clearing, or teardown preparation.
Excavation & Trenching
Fit digging, trenching, or rock buckets for utility trenching, drainage lines, foundation work, road subgrade work, and general earthmoving.
Grading & Cleanup
Grading, cleanup, and ditching buckets give the 350D LC the capability for finish contouring, slope dressing, ditch maintenance, loose material cleanup, and surface finishing.
Material Handling
Thumbs, grapples, and coupler-based tools let the 350D LC grab debris, brush, pipe sections, demolition fragments, and odd-shaped loads that a bucket alone cannot secure.
Compaction
A plate compactor adds value when the 350D LC is backfilling trenches, repairing utility cuts, restoring road bases, or preparing pads that require controlled density.
Hard Ground Preparation
A ripper or specialty ground tool breaks up compacted soil, frost layers, hardpan, or rocky subgrade so the bucket can follow through efficiently.
Attachment Fitment Factors
Pairing the right tool with the 350D LC means checking both machine-side specs and job-side demands. The points below help avoid mismatches that waste time and money.
Machine & Mounting Requirements
- Confirm the 350D LC's operating weight and size class.
- Measure pin diameter, pin spread, arm width, and coupler or quick-hitch type.
- Account for the available 8 ft. 9 in., 10 ft. 6 in., or 13 ft. 1 in. arm configuration when selecting an attachment.
- Check attachment weight against the machine's lift capacity and stability envelope.
- For buckets, verify width, capacity, tooth style, edge type, and duty rating.
Hydraulic & Application Requirements
- Confirm hydraulic flow and pressure for powered attachments.
- Verify auxiliary circuit layout, control mapping, and hose routing.
- Match breaker size and tool profile to the material and expected duty cycle.
- Match the attachment to the target material: concrete, rock, asphalt, soil, brush, or debris.
- Factor in production targets, operator skill, and site conditions before finalizing.
John Deere 350D LC Attachment Overview
Use this table as a quick reference to connect each attachment category to its primary purpose on the 350D LC.
| Carrier Model | Attachment Type | Best Use | Fitment Checks | Typical Applications |
|---|---|---|---|---|
| John Deere 350D LC | Montabert Hydraulic Breakers & Hammers | Fracturing concrete, rock, asphalt, and other hard materials. | V1800/V45/V2500/V3500/V55/XL2600 selection, hydraulic flow, pressure, breaker weight, bracket, tool type, and duty cycle. | Demolition, road repair, trenching, concrete removal, rock breaking. |
| John Deere 350D LC | Excavator Buckets | Earthmoving, trenching, grading, ditching, cleanup, and load handling. | Pin dimensions, arm configuration, bucket width, capacity, tooth style, edge type, and duty rating. | Excavation, utility work, grading, drainage, site development. |
| John Deere 350D LC | Couplers, Thumbs & Grapples | Swapping attachments and handling loose, bulky, or irregular loads. | Arm geometry, coupler type, thumb length, hydraulic plumbing, bracket, and lift limits. | Debris handling, brush removal, pipe placement, demolition cleanup. |
| John Deere 350D LC | Plate Compactors | Densifying trench backfill, soil, and utility repair zones. | Hydraulic flow, pressure range, compactor weight, bracket, and hose routing. | Trench compaction, road repair, backfill, utility installation, site prep. |
| John Deere 350D LC | Rippers & Specialty Tools | Loosening compacted or hard ground before excavation. | Carrier size, mounting setup, tooth design, material conditions, and breakout needs. | Hardpan, frost, rocky soil, site prep, pre-excavation ripping. |
Final compatibility varies by John Deere 350D LC configuration, arm, coupler, pin dimensions, hydraulic setup, and job application. Always confirm fitment before purchasing or installing an attachment.
Find the Right Attachment for Your John Deere 350D LC
BHE Attachments can compare the Montabert V1800, V45, V2500, V3500, V55, and XL2600 breakers along with buckets, couplers, thumbs, compactors, grapples, rippers, and specialty tools for the 350D LC. The ideal attachment hinges on whether the machine will be breaking, digging, grading, compacting, handling material, or preparing hard ground.
To narrow the field, share the serial number if you have it, current coupler or quick-hitch setup, hydraulic flow and pressure information, pin dimensions, and a brief description of the work.
Need Help Confirming Compatibility?
BHE Attachments can review your 350D LC's specifications, hydraulic requirements, mounting geometry, pin dimensions, coupler configuration, and application needs to point you toward the right attachment category and model.
Ready to quote attachments for your John Deere 350D LC?
Send your machine setup and job description to BHE Attachments so we can match the right attachment to the 350D LC's carrier class, hydraulic system, mounting requirements, and work conditions.