Caterpillar 336GC
Couldn't load pickup availability
Ask an expert
Caterpillar 336 GC Compatible Attachments
The Caterpillar 336 GC is a 36-ton class hydraulic excavator engineered for heavy-duty excavation, mass earthmoving, quarry work, road construction, and large-scale demolition support. Powered by the Cat C7.1 engine delivering 259 hp, this machine combines robust hydraulic performance with fuel-efficient operation for demanding job sites.
Attachment fitment for the Caterpillar 336 GC should be verified against the carrier's operating weight of approximately 35,400 kg (78,100 lb), hydraulic flow of 559 L/min, auxiliary circuit configuration, pin dimensions, coupler style, and the specific material conditions being worked. BHE Attachments can help review these details before quoting or installing an attachment.
Caterpillar 336 GC Attachment Matches
The attachment categories below are organized for the Caterpillar 336 GC carrier class. Final compatibility should be confirmed using the exact machine configuration, hydraulic setup, mounting dimensions, coupler style, and job application.
Hydraulic Breakers for Heavy Concrete, Rock & Quarry Work
Hydraulic breakers and hammers are a primary attachment match for the Caterpillar 336 GC when the job requires large-scale concrete breaking, rock breaking, quarry work, asphalt removal, trenching through hard material, or demolition support.
Montabert breaker models previously identified for review with this carrier class include V45, V2500, XL2600, V55, and V3500. Final selection should be based on the carrier's hydraulic flow of 559 L/min, operating pressure, breaker weight, bracket setup, and duty cycle.
Heavy-Duty Digging, Trenching, Grading & Cleanup Buckets
Bucket selection for the Caterpillar 336 GC should match the scale and intensity of the work. Heavy-duty digging buckets handle mass excavation and deep trenching, while severe duty and extreme duty buckets are built for abrasive quarry conditions, rock loading, and high-impact applications.
Bucket fitment should be checked by pin diameter, pin spread, stick width, coupler configuration, width, capacity up to 2.31 m3, tooth style, edge type, and material density up to 2,100 kg/m3.
Couplers, Thumbs & Grapples
Couplers, thumbs, and grapples extend the Caterpillar 336 GC's versatility for rapid attachment changes, debris handling, brush clearing, demolition cleanup, pipe handling, and sorting bulk material on large job sites.
These tools should be reviewed for stick geometry, thumb length, coupler type, hydraulic plumbing, bracket style, and the machine's lifting capacity and stability at full reach with its 6.8 mt counterweight.
Plate Compactors for Trench & Backfill Compaction
Plate compactors can be matched to the Caterpillar 336 GC for compacting large trenches, utility backfill, road repair sub-base, and site preparation areas where high-production compaction is required.
Compactor compatibility should be confirmed by attachment weight, hydraulic flow 559 L/min, pressure range, mounting bracket, hose routing, and the compaction area required for heavy civil projects.
Rippers & Specialty Excavator Tools
Rippers and specialty tools may be fitted to the Caterpillar 336 GC when working in compacted soil, frost, hardpan, rocky material, or site preparation conditions where a standard bucket is not the most efficient first tool.
Tool selection should be based on material type, breakout force of 197 kN bucket digging force, carrier size, mounting setup, and whether the tool will be used before mass excavation or as part of demolition cleanup.
Caterpillar 336 GC Jobsite Applications
These application notes help connect the Caterpillar 336 GC to the attachment type most often used for each kind of heavy-duty work.
Concrete & Rock Breaking
Use a properly sized hydraulic breaker, such as the Montabert V45, V2500, XL2600, V55, or V3500, when the Caterpillar 336 GC is assigned to heavy concrete removal, rock breaking, quarry work, asphalt removal, or large-scale demolition.
Excavation & Trenching
Use heavy-duty, severe duty, or extreme duty buckets when the machine is being used for mass excavation, deep utility installation, drainage work, foundations, roadwork, and quarry loading with its 1.88 m3 HD bucket.
Grading & Cleanup
Use grading, cleanup, or ditching buckets when the job requires finish shaping, slope work, ditch cleaning, loose material handling, or surface cleanup on large civil projects.
Material Handling
Use thumbs, grapples, or coupler-supported tools when the Caterpillar 336 GC needs to handle demolition debris, brush, large pipe, or irregular objects on construction and quarry sites.
Compaction
Use a plate compactor when the machine is supporting large trench backfill, utility repair, road construction, or site preparation where controlled high-production compaction is needed.
Hard Ground Preparation
Use a ripper or specialty ground-engagement tool when compacted soil, frost, hardpan, or rocky material needs to be loosened before mass excavation or quarry development.
Attachment Fitment Factors
The Caterpillar 336 GC should be matched with attachments using both machine specifications and jobsite requirements. These checks help reduce incorrect fitment, poor performance, and unnecessary attachment wear.
Machine & Mounting Requirements
- Confirm carrier operating weight of approximately 35,400 kg (78,100 lb) with standard equipment and operator.
- Check pin diameter, pin spread, stick width, and coupler configuration for Cat Pin Grabber or pin-on setup.
- Match the attachment bracket to the Caterpillar 336 GC mounting setup with 6.5 m reach boom.
- Review attachment weight against machine lifting capacity and stability limits with 6.8 mt counterweight.
- For buckets, confirm width, capacity up to 2.31 m3, tooth style, edge type, and duty rating for material density up to 2,100 kg/m3.
Hydraulic & Application Requirements
- Confirm hydraulic flow of 559 L/min and pressure requirements for powered attachments.
- Verify auxiliary hydraulic circuit setup, controls, and hose routing for hammer or compactor operation.
- Select breaker tools based on material, including moil point, chisel, blunt, or specialty tools for quarry work.
- Match the attachment to the material being worked: concrete, rock, asphalt, soil, brush, or demolition debris.
- Review duty cycle, production needs, operator use, and jobsite conditions before final selection.
Caterpillar 336 GC Attachment Overview
Use this table as a quick reference for matching common Caterpillar 336 GC attachment categories to their main purpose.
| Carrier Model | Attachment Type | Best Use | Fitment Checks | Typical Applications |
|---|---|---|---|---|
| Caterpillar 336 GC | Hydraulic Breakers & Hammers | Breaking heavy concrete, rock, quarry material, asphalt, and hard demolition debris. | Hydraulic flow 559 L/min, pressure, breaker weight, bracket, tool type, and duty cycle. | Demolition, quarry work, road repair, mass concrete removal, rock breaking. |
| Caterpillar 336 GC | Excavator Buckets | Mass digging, deep trenching, grading, ditching, cleanup, and heavy material loading. | Pin dimensions, coupler setup, bucket width, capacity up to 2.31 m3, tooth style, and edge type. | Mass excavation, utility work, quarry loading, grading, drainage, site development. |
| Caterpillar 336 GC | Couplers, Thumbs & Grapples | Changing attachments and handling loose, bulky, or irregular material at scale. | Stick geometry, coupler type, thumb length, hydraulic plumbing, and lift limits. | Debris handling, brush clearing, pipe handling, demolition cleanup, quarry sorting. |
| Caterpillar 336 GC | Plate Compactors | Compacting large trench backfill, soil, and utility repair areas at high production. | Hydraulic flow, pressure range, compactor weight, bracket, and hose routing. | Large trench compaction, road repair, mass backfill, utility installation, site prep. |
| Caterpillar 336 GC | Rippers & Specialty Tools | Loosening compacted or hard material before mass excavation or quarry work. | Carrier size, mounting setup, tooth design, material conditions, and breakout needs. | Hardpan, frost, rocky soil, quarry prep, pre-excavation ripping, site development. |
Final compatibility can vary by Caterpillar 336 GC configuration, coupler, pin dimensions, hydraulic setup, and job application. Always verify fitment before purchasing or installing an attachment.
Find the Right Attachment for Your Caterpillar 336 GC
BHE Attachments can help compare hydraulic breakers, heavy-duty buckets, couplers, thumbs, compactors, grapples, rippers, and specialty tools for the Caterpillar 336 GC. The best attachment depends on whether the machine will be breaking, digging, grading, compacting, handling material, or preparing hard ground in heavy civil or quarry environments.
To narrow the right option, provide the machine serial number if available, current coupler setup, hydraulic flow and pressure information, pin dimensions, and a short description of the work being performed.
Need Help Confirming Compatibility?
BHE Attachments can review your Caterpillar 336 GC specifications, hydraulic requirements, mounting setup, pin dimensions, coupler configuration, and application needs to help identify the right attachment category and product fit.
Ready to quote attachments for your Caterpillar 336 GC?
Send the machine setup and job application to BHE Attachments so the attachment recommendation can be matched to the Caterpillar 336 GC carrier class, hydraulic setup, mounting requirements, and work conditions.